Smart-UPS RT 6000VA, 230V with Pre-installed Input/Output Hardwire Kit
SURT6000XLI-ET
Discontinued on:31 December 2015
End-of-service on:31 December 2021
SURT6000XLI-ET has not been replaced. Please contact your customer care centre for more information.
Environmental performance of the product Learn more
Sustainable by Design
Energy Efficient
Take-back
Transparency
RoHS/REAChEnergy EfficientTake-backTransparencyRoHS/REAChThis product is compatible with
Specifications
| Lead time | Usually in Stock |
|---|
Run time for load WEnter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Min-max: 420-4200 W | |
|---|---|
Max. Capacity Used The maximum percentage of UPS capacity used to support your specified load. | |
| Main Input Voltage | 230 V |
| Other Input Voltage | 220 V 240 V |
| Main Output Voltage | 230 V |
| Other Output Voltage | 220 V 240 V |
| Rated power in W | 4200 W |
| Rated power in VA | 6000 VA |
| output connector type | Hard wire 3-wire (H N + E) 1 |
| Number of rack unit | 3U |
| Battery type | Lead-acid battery |
| provided equipment | CD with software Smart UPS signalling RS-232 cable User manual |
| Number of power module free slots | 0 |
|---|---|
| Number of power module filled slots | 0 |
| Redundant | No |
| colour | Black |
|---|---|
| Height | 43.2 cm |
| Width | 13 cm |
| Depth | 66 cm |
| Net weight | 54.55 kg |
| Mounting location | Front |
| Mounting preference | Lower |
| Mounting mode | Not rack-mountable |
| Two post mountable | 0 |
| USB compatible | No |
| network frequency | 50/60 Hz +/- 5 Hz auto-sensing |
|---|---|
| number of input connectors | 1 hard wire 3-wire |
| input voltage limits | 160...280 V |
| Maximum configurable power in W | 4200 W |
|---|---|
| Harmonic distortion | Less than 3 % |
| output frequency | 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz sync to mains |
| Crest factor | 3 : 1 |
| UPS type | Double conversion online |
| Wave type | Sine wave |
| Bypass type | Internal bypass (automatic and manual) |
| efficiency | 92 % (full load) |
| Maximum configurable power in VA | 6000 VA |
| Product certifications | C-Tick CE CSA GOST UL listed VDE |
|---|
| Ambient air temperature for operation | 0…40 °C |
|---|---|
| relative humidity | 0…95 % non-condensing |
| Operating altitude | 0...10000 ft |
| Ambient air temperature for storage | -15…45 °C |
| storage Relative Humidity | 0…95 % non-condensing |
| Storage altitude | 0.00…15240.00 m |
| Acoustic level | 55 dBA |
| Heat dissipation | 1221 Btu/h |
| IP degree of protection | IP20 |
| Run Time | View Runtime Graph |
|---|---|
| Number of battery filled slots | 2 |
| Battery recharge time | 2.5 h |
| Number of battery replacement quantity | 1 |
| Additional information | Configurable for 220 : 230 or 240 nominal output voltage |
| battery charger power | 421 W rated |
| Battery power in VAH | 1056 VAh runtime |
| Battery life | 3…5 year(s) |
| battery option | SURT192XLBP 1 2304 VAh SURT192XLBP 2 3820 VAh SURT192XLBP 3 5336 VAh SURT192XLBP 4 6852 VAh SURT192XLBP 5 8640 VAh SURT192XLBP 6 10713 VAh SURT192XLBP 8 14859 VAh SURT192XLBP 10 19008 VAh |
| Extended runtime | 1 |
| Free slots | 1 |
|---|---|
| alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Emergency power off | Yes |
| Surge energy rate | 555 J |
|---|---|
| Noise suppression | Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Warranty | 2 years repair or replace, optional on-site warranties available, optional extended warranties available |
|---|
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance.
Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn moreEnergy EfficientTake-backTransparencyRoHS/REAChEnergy EfficientTake-backTransparencyRoHS/REACh
Resource performance
Energy efficient product
Take-back program available
Well-being performance
Mercury free
Certifications & Standards
REACh Regulation
EU RoHS Directive
Environmental Disclosure
Circularity Profile
Documents
Software and Firmware
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.