Our Brands

APC Smart-UPS RT 8kVA 230V

SRTG8KXLI

battery type:

input voltage:

arrow2_down

Compatible Software

+ Lifecycle Services

arrow2_down

Specifications

Overview
Lead timeUsually in Stock
Main
Run time for load
W
information_circle
Enter the total load (power draw) of all devices that will be protected by the UPS. This will be used to estimate the run time of your devices during a total power outage. Adding run time increases availability by allowing the system to operate through longer outages without shutting down.
Min-max: 800-8000 W
Max. Capacity Used
information_circle
The maximum percentage of UPS capacity used to support your specified load.
Main Input Voltage230 V
Other Input Voltage220 V
240 V
Main Output Voltage230 V
Other Output Voltage220 V
240 V
rated power in W8000 W
rated power in VA8000 VA
nb of power socket outlets2 IEC 60320 C13
1 IEC 60320 C19
output connector typeHard wire 3-wire (H N + E) 1
battery typeLead-acid battery
provided equipmentSmart UPS signalling RS-232 cable
User manual
General
Number of power module free slots0
Number of power module filled slots0
redundantNo
Physical
height21.7 cm
width44 cm
depth68 cm
net weight101.44 kg
mounting preferenceNo preference
mounting modeRack-mounted with kit
two post mountable0
USB compatibleNo
Input
network frequency40...70 Hz auto-sensing
number of input connectors1 hard wire 3-wire (1P + N + E)
input voltage limits160...285 V
maximum input current30 A
switching current capacity40 A
Output
Maximum configurable power in W8000 W
harmonic distortionLess than 2 %
output frequency50/60 Hz +/- 3 Hz sync to mains
UPS typeDouble conversion online
full load runtime00:04:48 8000 W
half load runtime00:14:00 4000 W
Maximum configurable power in VA8000 VA
Conformance
product certificationsCE
standardsEN/IEC 62040-1
Environmental
ambient air temperature for operation0…40 °C
relative humidity0…95 % non-condensing
operating altitude0...6600 ft
ambient air temperature for storage-15…45 °C
storage Relative Humidity0…95 % Non-condensing
storage altitude0.00…15240.00 m
acoustic level55 dB
heat dissipation1774 Btu/h
IP degree of protectionIP20
Batteries & Runtime
Run TimeView Runtime Graphaction_new_window
EfficiencyView Efficiency Graphaction_new_window
number of battery filled slots2
number of battery free slots0
Battery recharge time4 h
additional informationConfigurable for 220 : 230 or 240 nominal output voltage
battery voltage+/- 96 V
battery charger power392 W rated
Battery power in VAH1680 VAh capacity
1680 VAh runtime
battery life3…5 year(s)
battery optionSRTG192XLBP4 1 3456 VAh
SRTG192XLBP4 2 5279 VAh
SRTG192XLBP4 3 6804 VAh
SRTG192XLBP4 4 9126 VAh
extended runtime1
Communications & Management
preinstalled deviceNetwork management card 3 with environmental monitoring
control panelLED Status display with on line : on battery
Multifunction LCD status and control console
alarmAlarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency power offYes
Packing Units
Package 1 Weight103.46 kg
Package 1 Height41.4 cm
Package 1 width59 cm
Package 1 Length79 cm
Contractual warranty
Warranty3 years repair or replace (excluding battery) and 2 years for battery
arrow2_down

Sustainability

Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products.
Learn morearrow2_left

EU RoHS Directive

Under investigation

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

arrow2_down

Documents

arrow2_down

Software and Firmware

Need more information? Check our technical FAQs!

Easily find answers to the most frequently asked questions.