Browse FAQs
MGE STS, Galaxy 3000, 4000, 5000 and Galaxy PW; Wiring information for egx100 to any 66061-supported products
This assumes only one 66061 card or UPS or STS is connected to the enclosure but if more than one change as required.
Smart-UPS VT-Galaxy 3500; Bypass Not Available Input Freq/Volt Out Of Range, Output: Inverter sync. to bypass alarms
For 50 Hz systems: 50 HZ +/- 0, 1 %
Information for Noise level of UPS Galaxy PW
Issue Information for Noise level of UPS Galaxy PW .
Information for Colors of different section in the UPS Galaxy PW
Issue: Information for Colors of different section in the UPS Galaxy PW .
Information for Noise level of UPS Galaxy 5000 NAM
Information for Noise level of UPS Galaxy 5000 NAM ... Galaxy 5000 NAM ... Galaxy 5000 40kva, 50kva, 60kva , 80kva, 100kva and 130kva ... Customer needs UPS room noise level with Galaxy 5000. ... for Galaxy 5000. ... UPS acoustic pressure level for linear loads are indicated below. UPS rating (kVA) 40/ 50 /60/80kva 100/130kva Noise level on a normal floor (dBA) with an RL load at 3 feet 65 63
How to reset MGE SNMP/ Web card back to default MGE UPS
72-174012-00:100-130kva parallel Galaxy PW
Video: How to take the Galaxy 5000 UPS from normal operation to total power off?
The instructions to power down the UPS are available on the display. This procedure is for a single UPS without an external bypass panel.
Video: How to take the Galaxy 5000 UPS from total power off to normal operation.
This procedure is for a single UPS without an external bypass panel.
How to take the Single Galaxy 5000 UPS from normal operation to total power off using an external Maintenance Bypass Panel
Issue: How to take the Single Galaxy 5000 UPS from normal operation to total power off using an external Maintenance Bypass Panel.
Information for Colors of UPS Galaxy 5000, Galaxy 5500
Environment: Galaxy 5000 40kva, 50kva, 60kva , 80kva, 100kva and 130kva