Browse FAQs
Video: How to take the Galaxy 5000 UPS from total power off to normal operation.
Step 2: Wait until the end of the UPS initialization with PFC start-up . Step 2: Push the Menu Button
Where can I get support for APC and MGE Products?
AIS 3000 ... Assessment Services ... Battery Replacement Services ... Charge- UPS EX ... Installation Services ... Matrix- UPS Matrix- UPS Accessories ... MGE Galaxy MGE Galaxy 300 MGE Galaxy 3000 MGE Galaxy 3500 MGE Galaxy 4000 MGE Galaxy 5000 MGE Galaxy 5500 MGE Galaxy 6000 MGE Galaxy 7000 MGE Galaxy 9000 MGE Galaxy PW ... MGE Service Bypass ... MGE UPS 4000 ... Network Integration Services ... On Site Service ... Project Management Services ... Remote Monitoring Services ... Service Bypass Panel Service Plans ... Smart- UPS Smart- UPS Accessories Smart- UPS Battery Systems Smart- UPS DP Smart- UPS On-Line Smart- UPS RT Smart- UPS VT ... Start-Up Service
APC UPS Network Management Card (NMC) Compatibility Chart
The AP9644 card is backward compatible with any Galaxy VS already installed. When the card is installed after the UPS , however, a new Start-up service (WSTRTUP-VS1-a50) needs to be purchased to upgrade the UPS and the card at the customer site.
What type of battery could I use with the Galaxy VS UPS?
Galaxy VS, 3 Phase UPS , Uninterrupted Power Supply,10 kVA ,15 kVA , 20 kVA , 20 kVA , 30 kVA ,40kva, ... use with the Galaxy VS UPS ?, battery ...
Video: How can the Galaxy VS reduce my energy bill?
Galaxy VS, 3 Phase UPS , Uninterrupted Power Supply,10 kVA ,15 kVA , 20 kVA , 20 kVA , 30 kVA ,40kva, ...
MGE STS, Galaxy 3000, 4000, 5000 and Galaxy PW; Wiring information for egx100 to any 66061-supported products
This assumes only one 66061 card or UPS or STS is connected to the enclosure but if more than one change as required.
Smart-UPS VT and Galaxy 3500 Power Off, Bypass and Power on Procedures
If applicable (Turn XR frame DC breaker on) Turn ON Q 1 (wait about 30 seconds.)
Matrix-UPS emits a chirping sound after being on-battery or running a self-test
... pack fails a UPS On-Battery ... scheduled or through UPS start-up ), the Matrix- UPS will emit chirps ... an interval of one minute to warn ...
Galaxy 3500, Smart-UPS VT and ais3000 Power Factor Information
Galaxy 3500, Smart- UPS VT and ais3000 Power Factor Information ... Galaxy 3500, Smart- UPS VT and ais3000 ... Galaxy 3500, Smart- UPS VT and ais3000 Power Factor Information ... The Input Power Factor is 1 . The Output Power Factor is 0.8 - what means that, for example, a 10kva unit can provide a maximum total load of 8KW. This means there is a difference of 20 % between real and apparent power.
Smart-UPS VT-Galaxy 3500; Bypass Not Available Input Freq/Volt Out Of Range, Output: Inverter sync. to bypass alarms
Smart- UPS VT- Galaxy 3500; Bypass ... Smart- UPS VT- Galaxy 3500-ais3000 ... occurs when the UPS is online, ... , the UPS should not allow ... to command the UPS to bypass. If the UPS allows you to ... are displayed for 20 > seconds) ... ... window, the UPS should be in ... 60 HZ +/- 0, 1 % ... 50 HZ +/- 0, 1 % ... When AC mains returns you may get a informational event for; Mains no longer prevents UPS from switching to bypass.