Browse FAQs
NetBotz 700 Series | Configuring Alarm Thresholds and Notifications (email & SNMP Traps)
The default is unchecked, making the alarm active 7x24 .
APC UPS Network Management Card (NMC) Compatibility Chart
Ships with ap9630 pre-installed in units manufactured post 2012. Older g7000 models require a special upgrade kit pre-2012 manufacture date.
Video: Using Network Management Card 2 (NMC2) bootmonitor to recover/upgrade firmware
Displays basic factory information (MAC address, model number, serial number, date of manufacture ).
Video: How to Select the Correct Replacement Battery Cartridge (RBC) for your UPS
The UPS indicates battery replacement is required or is providing insufficient runtime compared to when the UPS was first put into service . ... The first two numbers in the serial number indicate the year that the UPS was manufactured . ... 1650513 is a unit manufactured in 2004. ... Now that you've acquired your model, go to APC's convenient, easy-to-use ... You can simply enter your model # and the Selector will provide you with the available options for upgrading your ups, or purchasing a replacement battery cartridge (RBC).
Rack PDU 2G (AP8XXX) Network Port Sharing Information
If your AP88XX or AP89XX series Rack PDU was manufactured prior ... If your AP88XX or AP89XX series Rack PDU was manufactured after ... The Rack PDU group is now available via the Host's IP address. ... APC- Service -Type = Outlet, ... Updating firmware for Network Port Sharing Groups Currently , only the AOS file and rpdu2g application file are supported via the "auto-update" feature in a Network Port Sharing group. Bootmonitor upgrade (along with AOS and rpdu2g APP) is supported in rpdu2g v6.3.3 and higher.
Firmware Requirements Specification For the Aisle Containment Lighting Kit
Firmware Upgrades ... ) utilize a RS232 port for firmware upgrades as defined in the table below. ... 6.2.2 Manufacturing Test ... transition to Factory Calibration mode from the Nominal operational mode when it receives the Enter Manufacturing Test ... remain in Manufacturing Test Mode until the unit is power-cycled.
How do I upgrade the PowerChute Network Shutdown (PCNS) Virtual Appliance?
You can now upgrade the version of PCNS running on the Virtual ... ESXi installation files: This method will retain your existing configuration settings.
Video: How to upgrade NMC2 ap9630, AP9631, and AP9635 remotely over a network.
Click the Ping button to assure you have connectivity with the card to be upgraded. Click “ Upgrade Now ” button.
How do I perform a mass firmware upgrade on APC network enabled products?
checkbox and click Upgrade Now
Questions on upgrading 3 phase UPS systems capacity and runtime
You can also go thru your regular sales people that you purchased the system thru or obtain services thru currently .