How to properly update an NetworkAIR FM NMC via XModem.

Issue:
How to properly update an NetworkAIR FM NMC via XModem
 
Product line:
FM
 
Environment:
Data Center Cooling
 
Cause:
 
Resolution:
NOTE: Start Update with the AOS and then the Application file. Every time you finish, you need to totally log out of HyperTerminal.

• Open Hyper-Terminal Session /  set to 9600,8, None, 1, None

• Hit enter key 2 times and input user name--apc and password--apc.

Note—this is the default high level user name and pass word; this may have been changed by site personnel.

    

• From the control console enter: 3-System

• 4-Tools

• 6-File Transfer

• 1-XMODEM

• Respond YES

• Select 4-Baud Rate 38400

• Disconnect from Hyper Terminal, go to File, Properties and change port setting to 38400.

• Click Apply, OK, then reconnect and press ENTER

• Once connected the unit will start to Scroll CCC…  Showing connection is present
• Click on Transfer, Send File…

• 9. Click on Browse, locate file, and click Open. Set Protocol for Xmodem, click send.

• File transfer will begin…

• Once file transfer is complete, disconnect and exit hyper terminal session. Restart Hyper terminal session using the following port settings and check the control console for the proper AOS/Application files.