Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.
Explore APC Rack Power Distribution in 3D animation.
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.
|Product In-Line Current Meter, 16A, 230V, IEC309-16A, 2P+G||Part Number AP7152B|
|Product In-Line Current Meter, 32A, 230V, IEC309-32A, 2P+G||Part Number AP7155B|
|Product In-Line Current Meter, 32A, 230V, IEC309-32A 3-PH, 3P+N+G||Part Number AP7175B|
|Product Rack PDU, Metered, 1U, 12A/208V, 10A/230V, (8) C13||Part Number AP7820B|
|Product Rack PDU, Metered, 1U, 16A, 208/230V, (8) C13||Part Number AP7821B|
|Product Rack PDU, Metered, 2U, 32A, 230V, (12) C13 & (4) C19||Part Number AP7822B|
|Product Rack PDU, Metered, Zero U, 10A, 230V, (16) C13||Part Number AP7850B|
|Product Rack PDU 2G, Metered, ZeroU, 32A, 230V, (36) C13 & (6) C19||Part Number AP8853|
|Product Rack PDU 2G, Metered, ZeroU, 20A/208V, 16A/230V, (18) C13 & (2) C19||Part Number AP8858|
|Product Rack PDU 2G, Metered, ZeroU, 16A, 230V, (18) C13 & (2) C19, IEC309 Cord||Part Number AP8858EU3|
|Product Rack PDU 2G, Metered, ZeroU, 11kW, 230V, (36) C13 & (6) C19||Part Number AP8881|
|Product Rack PDU 2G, Metered, ZeroU, 22.0kW(32A) 17.3kW(24A), 230V, (30) C13 & (12) C19||Part Number AP8886|
|Local Current Monitoring Display||The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)|
|Alarm Thresholds||Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)|
|Remote Management Capabilities||Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.|
|Integrates with StruxureWare Data Center Expert||An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network|
|Load indicator LED||Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.|
|Flash Upgradeable||Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)|
|Wide range of input and output connections||Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.|
|Single input power source||Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.|
|Rack-Mountable||Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.|