SURT10000RMXLT6U
Price * :  $5,850.00
Email Technical Specifications
Printer Friendly

Smart-UPS On-Line
APC Smart-UPS RT 10,000VA Rack Tower 208V

SURT10000RMXLT6USURT10000RMXLT6U
More Images

APC Smart-UPS On-Line, 8000 Watts / 10 kVA,Input 208V / Output 208V, Interface Port DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot, Extended runtime model, Rack Height 6 U

Includes: CD with software, Rack Mounting support rails, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card

Standard Lead Time: Usually in Stock

Output

Output Power Capacity
8000 Watts / 10 kVA
Max Configurable Power
8000 Watts / 10 kVA
Nominal Output Voltage
208V
Output Voltage Note
Configurable for 208 or 240 nominal output voltage
Efficiency at Full Load
92%
Output Voltage Distortion
Less than 3%
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Crest Factor
3 : 1
Waveform Type
Sine wave
Output Connections
(1) Hard Wire 3-wire (2PH + G)
(2) NEMA L6-20R
(2) NEMA L6-30R
Bypass
Internal Bypass (Automatic and Manual)

Input

Nominal Input Voltage
208V
Input Frequency
50/60 Hz +/- 5 Hz (auto sensing)
Input Connections
Hard Wire 3-wire (2PH + G)
Input voltage range for main operations
160 - 280V
Other Input Voltages
240
Input Total Harmonic Distortion
Less than 7% for full load

Batteries & Runtime

Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules
4
Typical recharge time
2.20 hour(s)
Replacement Battery
RBC44
RBC™ Quantity
2
Extended Run Options
APC Smart-UPS RT 10,000VA Rack Tower 208V
Runtime Graph
Curve Part Number(s)
A SURT10000RMXLT6U
B SURT10000RMXLT6U
+ (1)SURT192RMXLBP3U
C SURT10000RMXLT6U
+ (2)SURT192RMXLBP3U
D SURT10000RMXLT6U
+ (3)SURT192RMXLBP3U
E SURT10000RMXLT6U
+ (4)SURT192RMXLBP3U
Hover over the line on the graph above to view the runtime at any desired load
Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.

Communications & Management

Interface Port(s)
DB-9 RS-232,RJ-45 10/100 Base-T,Smart-Slot
Pre-Installed SmartSlot™ Cards
AP9619
Control panel
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO)
Yes

Surge Protection and Filtering

Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

Maximum Height
10.35 inches (263 mm)
Maximum Width
17.00 inches (432 mm)
Maximum Depth
28.98 inches (736 mm)
Rack Height
6U
Net Weight
244.00 lbs. (110.91 kg)
Shipping Weight
284.00 lbs. (129.09 kg)
Shipping Height
21.75 inches (552 mm)
Shipping Width
23.50 inches (597 mm)
Shipping Depth
39.00 inches (991 mm)
Color
Black
Units per Pallet
1.00

Environmental

Operating Environment
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95%
Operating Elevation
0-10000 feet (0-3000 meters)
Storage Temperature
5 - 113 °F (-15 - 45 °C)
Storage Relative Humidity
0 - 95%
Storage Elevation
0-50000 feet (0-15000 meters)
Audible noise at 1 meter from surface of unit
55.00 dBA
Online Thermal Dissipation
2216.00 BTU/hr

Conformance

Regulatory Approvals
CSA,FCC Part 15 Class A,UL 1778
Standard Warranty
2 years repair or replace
Environmental Compliance
RoHS 7b Exemption
*Except where noted, all prices are Estimated Resale Price (ERP) - Without Tax/VAT. Pricing in other locations and sites may vary.
**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.
 
About APCAbout Schneider ElectricInvestorsJob SeekersPressFeedbackContactPrivacy Policy RSS