Technical FAQs

Ask a Question

MF-63103, MF-63123 to M400, or M800 Wiring Instructions (Airflow)

The below  schematic works for M400 & M800 actuators.  The system needs a 30VA transformer for the new actuator.  The actuator dipswitches need to be adjusted for Floating [24v open & 24v close] dipswitches 1 & 2 on and the rest off. 

Manual Operation
There is a red manual operation handle on the actuator, see figure 2.  When it is lowered, the motor stops. Then the actuator can be operated manually if the handle is turned.

         

Original Wiring


New Wiring



ATTENTION: Actuators are shipped with manual override lowered (MAN). For normal operating, the handle must be raised (AUTO).    


Was this helpful?
What can we do to improve the information ?