Technical FAQs

Ask a Question

How to Verify the setup and configuration for global outlet groups in AP86** Model ?

Path: Configuration > RPDU > Switched Outlet > Outlet Groups
To ensure that your setup meets all system requirements for outlet groups and that you have
configured the outlet groups correctly, view the groups and their connections:
• The Configure Group table displays the following:
– All configured outlet groups on the current Rack PDU.
– The outlets in each group by outlet number.
– Any outlet groups on other Rack PDUs with which a global outlet group is
synchronized. Each Rack PDU is identified by its IP address if using network mode, or
Display ID if using Network Port Sharing over In/Out ports. Each global outlet is
displayed in bold text.
• The Global Outlet Overview section displays the following:
– The IP address or Display ID of the current Rack PDU.
– The IP address or Display ID of any Rack PDUs that contain global outlets that are
available to be synchronized with outlet groups on other Rack PDUs.
– All global outlets configured on the Rack PDUs, regardless of whether they are
synchronized with outlet groups on the current Rack PDU.
Was this helpful?
What can we do to improve the information ?