Once you have configured the Auxiliary port, dial in access should be possible, as long as the modem is also configured properly.
When you dial in from your local workstation, you will establish a PPP connection, meaning your workstation will be assigned an IP address (the Remote IP Address as specified above) and the IP KVM will maintain its current IP. Once a connection has been established, you can open a web browser and enter the IP address of the IP KVM (the Local IP Address). The web login of the IP KVM should appear. Login as you normally would. Please remember that since you are establishing a dial in connection, your connection speed may be a lot slower than a connection over IP. This is a limitation of using a dial up connection and is not a problem with the IP KVM.