How to restore the appliance to factory defaults if you know the admin username & password:
WARNING: When restoring the appliance to its factory defaults, only the appliance IP address, subnet mask, and default gateway settings are preserved. All other settings are reset to factory defaults by this procedure.
1: Open a web browser
Configuration reset requested (keeping basic network settings)....
Reset InitiatedClose the browser
How to restore the appliance to factory defaults if you do not know the admin username & password:
WARNING: All settings, including TCP/IP settings, are reset to factory defaults by this procedure.1: If you have a V2 appliance, use a null modem serial cable (included with the bot) to connect the appliance to your computer system. If you have a V3 appliance, use a USBA-USBB cable(included with the netbot) to connect the appliance to your computer system.
appears on screen, press Enter to interrupt the boot process and activate the NetBotz> prompt.5: Type at the NetBotz> prompt: configreset
and then press EnterThe appliance will erase its Flash memory, write a new default configuration, and then restart automatically.